Settings Description - Visioneer NETSCAN 4000 User Manual

6. Touch the Scan tab to display the Scan Settings screen. If you want,
7. Press the B&W button to send your document(s) in black and white,
S
ETTINGS
Item Description
Resolution Choose a scanning resolution for your document. The higher the
resolution, the greater the detail for the scanned image. High
resolution settings take longer to scan and produce larger file sizes.
Choices: 75, 100, 150, *200, 300, 400, 600 dpi
Note: If you are scanning duplex (two-sided) paper, the resolution
for color or gray scanning have a maximum option of 300 dpi.
Original Size Choose your original paper size.
Choices: A4, Letter, A5, B5, Legal
Note: The Legal option is only available when scanning from the
ADF.
Image Density If your original document is too light or too dark, you can use this
option to adjust the density level.
Choices: 1, 2, 3, *4, 5, 6, 7
Original Doc. Choices: Simplex, Duplex(Long), Duplex(Short)
Simplex: If your original is a single-sided document, choose
■
Simplex to scan your documents only on one side.
■ Duplex(Long): If your original is a double-sided document, and
is bound along the long edge of paper, choose Duplex(Long) to
scan your document on the front and the back side.
■ Duplex(Short): If your original is a double-sided document, and
is bound along the short edge of paper, choose Duplex(Short) to
scan your document on the front and the back side.
change the file format and the compression. (For information about
the setting, please see the setting descriptions below.)
or the Color button to send your document(s) in color.
D
ESCRIPTION
Basic
S Y D
ENDING OUR OCUMENT TO
F S 97
ILING ERVERS