Auto Dial Tab; Auto Dial Numbers; Dial Type - Brother MFC 7050C Owner's Manual

Auto Dial Tab

This tab allows you to quickly enter Speed Dial, One Touch and
Group numbers in the MFC's database. These numbers are dialed
using the MFC's control panel. Click the Auto Dial tab on the Fax
Settings dialog box to display this screen:
Click the Apply button to save your settings.

Auto Dial Numbers

Dial Type

Note:
21-8
B R O T H E R C O N T R O L P A N E L
Speed Dial
You can store up to 100 Speed Dial numbers, so when you dial
you only have to press three keys and the Start key.
To store a pause in the dialing sequence, click the Insert
Pause button as many times as needed. Each key press stores a
3.5 second pause.
One Touch
You can store 24 fax/phone numbers that you can dial by
pressing one key and the Start key. You also can store names
with these numbers. (One Touch keys are not the dial pad keys.
Numbers 13-24 are accessed by holding down the Shift key
while you press the appropriate One Touch key.)
To store a pause in the dialing sequence, click the Insert
Pause button as many times as needed. Each key press stores a
3.5 second pause.
Numbers can be dialed only using the MFC's front
panel controls. For more information on dialing
numbers, see Chapter 9, "Telephone Operation."