NEC N8103-104 User Manual page 8

Connect firmly.
Please connect the product to the computer firmly. A loose connection can cause a
contact failure and can lead to smoke or fire.
Insert the power plug into the outlet as far as it goes.
Heat generation resulting from a halfway inserted power plug/cable (imperfect contact)
may cause a fire. Heat will also be generated if condensation is formed on dusty
blades of the halfway inserted plug, increasing the possibility of fire.
Do not use any unauthorized interface cable.
Use only the interface cable that comes with your server. Use of an unauthorized
interface cable may cause a fire when the electric current exceeds the rated flow.
Also, observe the following to prevent an electric shock or fire caused by a damaged
cord.
Do not use any damaged cable. (Replace a damaged cable with a new one of the
same specifications. Ask your sales agent for replacement.)
Do not step the cable.
Do not place any object on the cable.
Do not alter, modify, or repair the cable.
When disconnecting a cable, hold the connector, and pull it out straight.
Confirm that the SAS cable connector is not damaged and connector pins are not
bending before connecting the cable.
Use only the SAS cable authorized by NEC and connects it to the proper connector.
Ignoring these instructions may cause a short circuit, resulting in a fire, electric shock,
or malfunction.
Do not use or store this product in corrosive environment.
Avoid the usage or storage of this product in an environment which may be exposed to
corrosive gases, such as those including but not limited to : sulfur dioxide, hydrogen
sulfide, nitrogen dioxide, chlorine, ammonia and/or ozone.
Avoid installing this product in a dusty environment or one that may be exposed to
corrosive materials such as sodium chloride and/or sulfur.
Avoid installing this product in an environment which may have excessive metal flakes
or conductive particles in the air.
Such environments may cause corrosion or short circuits within this product, resulting
in not only damage to this product, but may even lead to be a fire hazard.
If there are any concerns regarding the environment at the planned site of installation
or storage, please contact your sales agent.
CAUTION
- 6 -