Table of Contents
Advertisement
22
Troubleshooting
Problem
Decrease in
suction strength
Possible cause
Dirt recipient / Bag
is full
Dirt recipient is not
properly attached
Open vacuum inlet
Exhaust line is
clogged
Blocked hose
Troubleshooting
Corrective action
Empty dirt recipient / change
bag (see page 17 to 19).
Check clamps holding dirt
recipient, to make sure they
are tight, and dirt recipient is
aligned.
Close all vacuum inlets not in
use.
Verify that no object is blocking
the exhaust.
Plug the handle end of the
hose into the suction inlet, thus
reversing the suction in the
hose. Cover the gap around
the handle, to ensure suitable
suction strength, and ensure
contact with inlet contacts to
start the unit. This should clear
the hose.
Advertisement
Table of Contents
