Converting The Unit - Riccar Hybrid Central Vac Owner's Manual

Converting the Unit

Your Riccar central vacuum unit was designed for use with or without
disposable bag. Though it is sold with a bag installed, it can easily be
removed, and the unit modified for use without disposable bags.
1. Using a flat screwdriver, loosen the clamp collars
and remove the rubber coupling from the air
intake (see page 6, figure 4).
2. Unlatch the two clips and remove the dust
receptacle (see page 17, figure 15).
3. Remove the bag (see page 17).
4. Pull the bag adaptor out of the air intake
(see page 6, figure 5).
5. Put the other adaptor provided in the air intake
and, making sure that the tabs are aligned
with the notches, push it completely in
(figure 20).
6. Put the rubber coupling back on the air intake
and tighten the clamp collars using a flat
screwdriver.
7. The vacuum unit is now ready for use
without bag.
Note: this procedure is reversible at any time. For instructions on
installing the dust bag, please refer to page 17.
Maintenance
19
figure 20