Power & Safety Magnet Key - Vision Fitness Simple and Deluxe Owner's Manual

POWER
Ensure that your Treadmill is
properly connected to a power
outlet, then turn on the Power
switch, located at the front of the
main frame.
SAFETY MAGNET KEY & CLIP
Your VISION FITNESS Treadmill
will not start unless the Safety
Magnet Key is inserted into the
circle in the console overlay. You
should attach the clip end to your
clothing. If at any time you need to
stop the Treadmill quickly, simply
pull the Safety Magnet Key off the
console. This will cut all power to
the Treadmill, and it will come to a
complete stop. To resume your
workout, place the Safety Magnet
Key back in place. This will send
you back to the start-up mode.
8