Advertisement
6 6 6 6
Soundcraft 328XD and Fostex RD8
RD-8 CONFIGURATION
Firstly, turn on the Slave RD-8. Allow a few seconds for the RD-8 to boot correctly. Next turn on the
Master RD-8. Allow a few more seconds for the Master RD-8 to boot and recognize the Slave RD-8.
Master RD-8 Configuration
To set the Sample Rate:
Press <HOME>, <F1> on the Master RD-8. The display will show the current sample rate. To select a
sample rate of 44.1kHz press <F1> or to set a sample rate of 48.0kHz press <F3>.
NOTE:
Before selecting the sample rate, it is necessary to decide whether work is to be carried out at
44.1kHz or 48.0kHz.
To set MIDI as remote control source:
Press <DATA EDIT> if not already lit and then press <REMOTE LOCAL>. The red REMOTE LED only
should be lit and the display will show the Remote In menu page. <F3> should then be pressed to set
the Master RD-8 MIDI input as the remote source.
To set the Clock Source to Internal:
Press <DATA EDIT> if not lit and then press <CHASE ON/OFF>. The red CHASE LED should be lit. If
the display does not now show the ClockSrc page, press <HOME>. The display should now show the
ClockSrc menu page. Using the Up and Down cursor keys, the clock should be set to Internal.
To activate the Digital Inputs, press <DIGITAL IN>, and to set the Input Monitor to Auto press INPUT
MONITOR <AUTO>.
Advertisement
