Advertisement
Once Fostex RD-8 has been selected, the timecode source must be selected. Press the Down cursor key
and set the timecode source to either MTC (MIDI Timecode) or LTC (Linear Timecode / SMPTE).
NOTE:
If no SMPTE cable has been connected, MTC must be selected; if a SMPTE cable has been
connected, LTC must be selected.
The frame rate must also be selected. The options are 24 frame, 25 frame, 30 drop frame and 30 non-
drop frame. Whichever is selected here must also be selected later when setting up the Master RD-8 to
generate the timecode.
Once the 328XD has been set up, it is very advisable to store a User Setup of the above settings Enter
the Menu pages by pressing the <MENU> button and scroll through the menus until 'User Setups' is
highlighted. Press <ENTER> and scroll to find a vacant location. Press <STORE> in the 328XD
Snapshot panel. The User Setup will now be stored. To edit the parameters of the User Setup, while it is
highlighted in the display, press <ENTER>. To recall the User Setup, highlight it in the LCD and press
the <RECALL> button in the Snapshot panel.
Before proceeding to the RD-8 setup, recall the User Setup and switch off the 328XD.
or
Soundcraft 328XD and Fostex RD8
5 5 5 5
Advertisement
