Table of Contents
Advertisement
Menus
A menu can contain up to ten menu items (0 .. 9; 0 for menu item 10). After the selection of a menu item using
the cursor buttons ( ) and ( ) and by tapping the ENTER button (
submenus or operating screens are displayed.
Selection of the menu items
Each line of this selection list in the display has a digit between 1 and 9 and 0 for menu item 10 with the
associated name of the corresponding menu item. The various menu items can be selected directly by tapping
the digit buttons 0 .. 9.
If a menu provides more than 3 submenus, the cursor buttons (� ) and ( ) can be used for paging in the
menu to display the remaining menu items.
A menu item can be selected by pressing the respective numeric key regardless of whether the item
itself is visible on the display.
Screens
An operating screen shows values for output and/or input. There may be more values for output and/or
input than fit into the display at one time. The cursor keys can be used to scroll through these additional values.
The screen may also contain more than one page, in which case the pages can be viewed one at a time.
Arrows appear on the right of the display to indicate whether you can scroll or page through a menu or
screen.
Scrolling
Using the cursor buttons ( �↑ ) and ( �↓ )
• scrolling can be line by line, e.g. for selection of a variable in a line from a list of predefined variables.
• scrolling can be block by block so that values can be shown that cannot be displayed with the others due
to the limited capacity of the display
Paging
If an operating screen contains multiple pages (e.g. the alarm list), these can be paged through using the
cursor buttons ( �← ) and (→ ). In menus that provide more than 3 submenus, these can be paged through
using the cursor buttons ( ↑) and ( �↓ ) to display the remaining menu items.
MODE + 9 three lines upwards and
MODE + 3 three lines downwards
Input of values and text
Select the required line using the cursor buttons ( ↑ ) and ( ↓ ) and then tap the ENTER button (↵). The
cursor jumps to the input field. Values can now be entered and changed using the cursor buttons ( ↑ ) and ( ↓ )
or digit buttons.
If the cursor buttons ( ↑ ) and ( ↓ ) are kept pressed, the adjustment is made in high speed mode.
Firmware V3.00
) or by tapping the buttons 0..9), other
05.08.2019
76/100
Advertisement
Table of Contents
