Terminal Assignment Of The 230 V Ac Relay Outputs - ECKELMANN UA 410 L Series Operating Instruction

7.3 Terminal assignment of the 230 V AC relay outputs


Warning - hazardous electrical voltage!Danger of electric shock!
BEFORE and AFTER connection it must checkedthat the 230 V AC relay outputs are off load! Low
voltage and safety extra-low voltage must not be applied together at the relay outputs.
Relay 7
Controller 74, 73
type
UA 410 L Not used

Fire hazard! On grounds of fire prevention, during the planning of the installation a device for shutting
down the defrost heating in the event of excessive temperature (e.g. "KLIXON") must be provided.

If any relay output is activated by the controller, the associated green LED lights, see
LEDs for details.
Firmware V3.00
Relay 6 Relay 5
64, 63 54, 53
Cooling 5 Cooling 4
05.08.2019
Relay 4 Relay 3
44, 43 38, 36, 35
Cooling 3 Cooling 2
Relay 2 Relay 1
28, 26, 25 18, 16, 15
Cooling 1 Alarm
chapter Status
60/100