Advertisement
Available languages
Available languages
What is Included
•
Ovation H-55FC
•
65°, 40°, and 25° Lens
•
80° Filter
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Replacing the Fuse
1. Disconnect the product from power.
2. Using a flat head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Ovation H-55FC will work with a DMX controller using a wireless, 5-pin serial or hard-wired connection. A DMX
Primer is available from www.chauvetprofessional.com.
DMX Connection
The Ovation H-55FC uses a 5-pin DMX or hard-wired connection for its DMX personalities:
12Ch
13Ch
16Ch
,
,
, and
DMX Hard-Wire Diagram
Master/Slave Connection
The Ovation H-55FC uses the DMX data connection for its Master/Slave mode.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation H-55FC supports RDM protocol that allows feedback to make changes to menu map
options.
Ovation H-55FC QRG Rev. 3
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
HSV
.
•
Egg Crate
•
Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
Screw Color
Yellow/Brass
Silver
Green
3Ch
5Ch
7Ch
10Ch
,
,
,
EN
,
2
Advertisement
