Hyundai IONIQ EV Owner's Manual page 340

Table of Contents

Advertisement

Driving your vehicle
• The braking control is operated for
FCA (Forward Collision-Avoidance
Assist)
• The driver starts driving by pushing
the toggle switch up (RES+)/down
(SET-) or depressing the accelera-
tor pedal, after the vehicle is
stopped by the Smart Cruise
Control system with no other vehi-
cle ahead.
• The driver starts driving by pushing
the toggle switch up (RES+)/down
(SET-) or depressing the accelera-
tor pedal, after stopping the vehicle
with a vehicle stopped far away in
front.
• When motor is stopped by ISG
(Idle Stop & Go).
5-104
Each of these actions will cancel the
Smart Cruise Control operation. The
Set Speed and Vehicle-to-Vehicle
Distance on the LCD display will go
off.
In a condition the Smart Cruise
Control is cancelled automatically,
the Smart Cruise Control will not
resume even though the RES+ or
SET- toggle switch is pushed.
Also, if the Smart Cruise Control is
cancelled automatically while the
vehicle is at a standstill, the EPB
(Electronic Parking Brake) will be
applied.
i
Information
If the Smart Cruise Control is can-
celled by other than the reasons men-
tioned, we recommend that the system
be
checked
by
an
authorized
HYUNDAI dealer.
OOSEV058090L
SCC (Smart Cruise Control) can-
celled
If the system is cancelled, the warn-
ing chime will sound and a message
will appear for a few seconds.
You must adjust the vehicle speed by
depressing the accelerator or brake
pedal according to the road condition
ahead and driving condition.
Always check the road conditions.
Do not rely on the warning chime.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents