Hyundai IONIQ EV Owner's Manual page 592

D D R D D R R R I I I I V V V I V I I N I N N G N G G E G E E E L L L E L E E C E C C T C T T R T R R I R
WARNING
When the function is activating
the third Charging Indicator
Lamp will blink and high voltage
electricity will be flowing in the
vehicle. Do not touch the high
voltage electric wire (orange),
connector, and all electric com-
ponents and devices. This may
cause electric shock and lead to
injuries. Also, do not modify
your vehicle in any way. This
may affect your vehicle perform-
ance and lead to an accident.
H86
I I C I C C V C V V E V E E E H H H I H I I C I C C L C L L E L E E E ( ( ( C ( C C O C O O N O N N T N T T . T . . ) . ) ) )
Utility Utility Mode Mode
The high voltage battery is used
instead of the 12V auxiliary battery
for operating the convenient features
of the vehicle. When driving is not
necessary such as while camping or
when stopping the vehicle for a long
time, it is possible to use the electri-
cal devices (audio, lights, etc.) for
long hours.
System Setting and Activation
OAEEQ016025
System System setting setting
The driver can activate the Utility
Mode function when the following
conditions are satisfied.
• The vehicle is in the ready (
mode and the gear is shifted to P
(Park).
• The EPB (Electronic Parking
Brake) is applied.
• 'User Settings → Convenience →
Utility Mode' is selected in the clus-
ter.
System Activation System Activation
When the system is activated:
• The indicator will turn off and
the indicator will illuminate on
the cluster.
• All electric devices are usable but
the vehicle cannot be driven.
• The EPB can be cancelled by
pressing the EBP switch.
• Gear cannot be shifted out of P
(Park). If a shift attempt is made, a
message "Shifting conditions not
met" will be displayed on the clus-
ter.
System Deactivation
)
The Utility Mode can be deactivated
by pressing the POWER button to
the OFF position. The function can-
not be deactivated from the User
Settings mode.