Viper 1000 Model Owner's Manual page 30

AED feature by turning the ignition key to the RUN posi-
tion and pressing the Valet button the programmed number
of times. AED is disabled when the system is in Valet Mode.
note: This feature will only function if the Failsafe
Starter Kill relay has been installed.
➤ Full trigger response 3 3 0 0 or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the Directed Bitwriter
gered response can be programmed for any duration ranging
from 1 to 180 seconds.
➤ Nuisance Prevention
NPC section of this manual for a complete explanation of
®
how NPC
®
ty system will respond to inputs from any sensor indefinitely.
note: Because many states have laws regulating security
systems, programming NPC
to violate state laws.
➤ Progressive door trigger o o n n or off: When the system is armed
and a door is opened, the system responds with ten chirps
prior to beginning the full triggered sequence. If an instant
trigger is desired, the progressive door trigger can be pro-
grammed off.
© 2005 directed electronics, inc.
Circuitry o o n n or off: Please refer to the
®
operates. If NPC is programmed off, the securi-
®
off may cause your system
®
®
, the full trig-
®
31