Panic Mode; Valet Mode - Viper 1000 Model Owner's Manual

➜

panic mode

If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter. Just
press or
Mode. The siren will sound and the parking lights will flash for
the programmed siren duration. To stop Panic Mode at any time,
press ,
➜

valet mode

You can prevent your security system from automatically arming
and triggering by using Valet Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
security system will not arm, even with the remote transmitter,
but all convenience functions (door locks, trunk release, etc.)
will continue to work normally.
To enter or exit Valet Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
The status LED will light solidly if you are entering Valet Mode,
and it will go out if you are exiting Valet Mode.
© 2005 directed electronics, inc.
for two seconds, and you will enter Panic
or on the remote transmitter again.
button within 10 seconds.
DRW-35
19