Table of Contents
Advertisement
No.
Description of message
M-042 Cannot insert trimming at current position.
M-043 Cannot add same function code in one position.
M-044 Cannot insert 2nd origin at current position.
M-045 Cannot create arc or circle at the inputted point.
M-046 Cannot create overlapped sewing data.
M-047 Cannot insert trimming after temporary stop.
M-048 Cannot insert temporary stop before trimming.
M-049 Not find offset sewing data.
M-050 Not find multi-sewing data.
M-051 Select wrong position.
M-052 Cannot scale.
M-053 Distance over 12.7 mm.
M-054 Wrong pattern data
M-055 Create arc?
M-056 Create circle?
M-057 Create curve?
M-058 Create polygon?
M-059 Cassette clamp is not down.
M-060 Wrong User ID
M-061 Fail to conform password.
M-062 Cannot change system time.
M-063 Fail to save password file.
M-064 Fail to load password file.
M-065 Password saved successfully.
M-066 Fail to clear all passwords.
M-067 Fail to clear password.
M-068 Password file is deleted without authorization.
M-069 User ID file damage
M-070 Input pattern name.
M-071 Please clear current combination data.
M-072 Empty input invalid.
M-073 Password not match.
M-074 New password is different.
M-075 Touching panel correction successful.
M-076 Clear alarm records?
M-077 Delete the selected file?
M-078 Copy all patterns.
M-079 Fail to copy file.
M-080 Fail to copy file.
M-081 Fail to open file.
M-082 Format not match.
M-083 Parameter over range
M-084 Please create directory and file.
M-085 File I/O error
Item to be checked
Please add trimming behind sewing data.
Please add 2nd origin after feeding.
Please input again.
Please add overlapped sewing after close shape.
Function of offset sewing data transfer is unavailable.
Function of multi-sewing data transfer is unavailable.
Press the Cassette clamp switch.
Please input again.
Please input password again.
The periodical password is set. Can not change system time.
Cannot delete password file.
After the password is cleared, the file input becomes
abnormal.
Periodical password is deleted without authorization, please
turn OFF the power.
Please input pattern name no more than 8 figures.
Press the "CLR" key to delete current combination data.
Can not input empty password.
Current password is wrong.
New password is different from the retry password.
Correction is successful. Please turn OFF power to restart.
Yes : Enter key, No : X key
Yes : Enter key, No : X key
Cover the original patterns?
Yes : Enter key, No : X key
Please check the space in memory.
Please check if the USB is pulled out.
Fail to open file.
Formats don't match, current load denied.
Parameter is over range. After confirmation, the parameter
over range will be restored according to the default
parameters.
Please create backup parameter directory in USB. Name
the back-up file as "backup.param" and copy it to backup
parameter directory.
File I/O error
– 66 –
Advertisement
Table of Contents
