JUKI PS-700 Instruction Manual page 53

Ⓒ Ⓐ Ⓑ
4. Temporary stop
When you need to temporarily stop the sewing machine during sewing, press pause switch Ⓒ . The sewing
machine immediately stops with its needle up (the factory-set stop position of the sewing machine at the time
of shipment) to bring itself into the temporary stop state.
To release the sewing machine from the temporary stop state, press start switch Ⓑ . In addition, the following
operations can be carried out directly from the temporary stop state.
① Sewing can be carried out from the temporarily-stopped position by pressing start switch Ⓑ .
② Sewing machine can be brought to the sewing starting position by pressing forward/backward key B.
③ Template is lifted by pressing cassette clamp switch Ⓐ .
④ Set value of sewing machine speed can be changed.
⑤ The intermediate presser can be lifted with the
5. Method to splice seams
Seams can be spliced by using the aforementioned temporary stop function in the case of thread breakage,
etc.
① When you press pause switch Ⓒ , the sewing machine stops with its needle up.
② Press backward key B to return the template to move the template backward to the position that is two or
three stitches behind the position at which thread has broken.
③ Press the
key to lift the disc presser and the intermediate presser.
④ Re-thread the sewing machine head. Then, press the
diate presser.
⑤ You can start sewing continuously from the aforementioned template position by pressing start switch Ⓑ .
Never touch the start switch Ⓑ on the operation panel during threading of sewing machine
head. Be aware touching the start button is very dangerous since the sewing machine starts
running if it is touched.
B
key.
key to lower the disc presser and the interme-
– 50 –