JUKI PS-700 Instruction Manual page 37

(2) Setting the deviation amount of pen
1) Press the key on the main screen P1 to
display the "Menu screen".
2) Press the
setup mode".
3) Change over pages by pressing the
key, and press the
key.
4) Press the
page. Press the
rection deviation amount edit screen" for the pen.
5) Enter the measured deviation amount in the
X-direction. Press the
returns to the previous screen.
– 34 –
key to enter the "Operation
key to change over the
key to display the "X-di-
key. Then, the screen