GE G018 Owner's Manual page 12

Hide thumbs Also See for G018:
Table of Contents

Advertisement

Available languages

Available languages

Before you call for service...
OPERATION
Possible
Causes
What
To Do
Washer does not fill
This is normal
, The lid must be closed for washer to fill or operate.
when lid is open
Washer won't operate
Washer is unplugged
• Hake sure cord is plugged securely into a working outlet.
Water supply is turned off
• Turn both hot and cold faucets fully on.
Controls are not set properly
- Check controls.
Lid is open--safety
feature
• Close lid and press Start.
prevents agitation and
spinning when lid is up
Circuit breaker/fuse
is
• Check house circuit breakers/fuses. Replace fuses or
tripped/blown
reset breaker. Washer should have a separate outlet.
Electronics need to be reset
• Unplug washer, wait 2 minutes, plug back in and press Start.
Start was not pressed
,, Press Start.
Lid magnet missing
• Call for service.
Dispenser not dispensing
Laundry detergent packet
, Laundry detergent packets should not be used in the dispensers.
properly
placed in dispenser
They should only be added directly to the wash basket following the
manufacturer's directions.
Unexplained time and/or
Changing options
• This is normal. Several options will change other options to
settings changes
maximize washer performance.
Movement inside machine
Shifting mechanism is
• When the machine is manually turned off, the shifter will
when shut off
disengaging the motor
disengage the motor before completely shutting down.
If lid is raised before the motor is disengaged, it will resume
when lid is closed.
Basket seems loose
Basket moves or rotates freely
• Washer basket does not have a traditional brake. Basket will
move freely. This is normal.
PERFORMANCE
Possible Causes
What To Do
Clothes too wet
Incorrect cycle selected.
• Hake sure the cycle selected matches the load you are
washing. Some fabrics will feel wetter when rinsed with cold water.
Wash load out of balance
• Redistribute loud in washer and run through Drain & Spin cycle.
Colored spots
Incorrect use of fabric
• Check fabric softener package for instructions and follow
softener
directions for using dispenser.
• Hake sure you hove selected the Deep Rinse option.
• Pretreat stain and rewash using Quick Rinse cycle before drying.
Dye transfer
• Sort whites or lightly colored items from dark colors.
Grayed oryellowed
Detergent amount
• Be sure to follow detergent manufacturer's directions.
clothes
Hard water
• Use a water conditioner or install a water softener.
Water is not hot enough
• Hake sure water heater is delivering water at
120°F-!40°F (48°C-60°C).
Washer is overloaded
• Loosely load clothes no higher than the top row of holes in the
washer basket. For best results, load items around the outside
of the basket.
Dye transfer
• Sort clothes by color. If fabric label states wash separately,
unstable dyes may be indicated.
Lint or residue on
Clothes are air or line dried
• If you do not dry your clothes with a clothes dryer, your
clothes
clothes may retain more lint.
Incorrect sorting
• Separate lint producers from lint collectors.
Washing too long
• Wash small loads for a shorter time than larger loads.
Detergent not dissolving
• Rewash using Quick Rinse cycle with Extra Rinse option.
• Try a liquid detergent.
• Use warmer water temperature.
Overloading
• Loosely load clothes in the washer basket. For best results, load
items around the outside of the basket.
Incorrect use of fabric
• Check fabric softener package for instructions
softener
and follow directions for using dispenser.
• Hake sure you have selected the Deep Rinse option.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents