NEC Nitsuko 32i How To Reboot Or Power Down

How to Reboot or Power Down an NEC Nitsuko How to Reboot or Power Down an NEC Nitsuko 32i, 96i & 96+
Please follow the guide below for instructions on how to reboot or power down Please follow the guide below for instructions on how to reboot
32i, 96i & 96+ System.
Power Switch
The power switch is located on the left
one is for the main system and the other is in case a battery backup unit has been fitted. one is for the main system and the other is in case a battery backup unit has been fitted. one is for the main system and the other is in case a battery backup unit has been fitted.
The 96i & 96+ System can support up to 3 cabinets. 96i & 96+ System can support up to 3 cabinets. The 32i System only supports 1 standalone
cabinet. If you have more than one cabinet, they must be turned off and then on again in a
certain order. Please see below images of what the systems will look like if it is a standalone certain order. Please see below images of what the systems will look like if it is a standalone certain order. Please see below images of what the systems will look like if it is a standalone
cabinet or if there is 1 expansion cabinet or 2 expansion cabinets. cabinet or if there is 1 expansion cabinet or 2
Power switches are located in the bottom left hand corner on all cabinets.
Power Switches Single Cabinet System Single Cabinet System
located on the left hand side of the unit. There are two power switches,
ve more than one cabinet, they must be turned off and then on again in a ve more than one cabinet, they must be turned off and then on again in a
located in the bottom left hand corner on all cabinets. located in the bottom left hand corner on all cabinets.
Two Cabinet System
or power down an NEC Nitsuko
There are two power switches,
The 32i System only supports 1 standalone
Three Cabinet System Cabinet System
System