Preparation For Using The Unit; Installing Batteries - Seiko ER5000 Operation Manual

Preparation for using the Unit

1. Installing Batteries

The unit is powered by two (2) "CR2032" size batteries.
Before using the unit, please install the batteries as the follows.
1. Turn the unit over.
2. Pull two tabs to remove and engage two
batteries.
3. Press the "RESET" button on the front
of the unit.
(See )
Resetting
10
4. The contrast adjustment display will appear.
( See page 12. )
Resetting
If the unit does not operate properly after the battery has been replaced, or
if at any time the unit fails to operate properly, gently press the "RESET"
button on the front of the unit.
NOTE:
Resetting product erases the EASY LEARN list in the memory.
11