Preparation for using the Unit
1. Resetting
Before using the unit, press the
"RESET" button on the front of
the unit.
The contrast adjustment display will
appear. ( See page 9. )
ALWAYS press the "RESET" button on the front of the unit after
battery replacement or if the unit fails to operate properly.
NOTE: Pressing the "RESET" button will clear the Easy Learn
Memory.
8
2. Contrast Adjustment
1. After resetting, the contrast
adjustment display will appear.
2. You can use either
to adjust the contrast of the display
Level 1 to Level 16.
(Initial setting = 10)
3 Press
to finish.
The display will enter the Thesaurus mode.
* If you want to adjust the contrast of the display again, press
Select " LCD Contrast" by using
( See page 63. )
LCD Contrast Adjust
or
LCD Contrast Adjust
or
.
9
.