Connect the cables as detailed in the diagram overleaf, then follow the steps below to complete the setup of the Avaya IX Tracking Camera TC220. For details on how to use the system after setup, see the User Guide for Avaya IX Room Systems XT Series.
There is no Remote Control button or shortcut to Start Will be solved using the upcoming / Stop the TC220 Camera Voice Tracking – the User Avaya IX Videoconferencing XT is forced to contact IT Admins to go into the Admin Series R9.2.2 (Target GA end of...
3. Verify that the PC is connected to the network in wired mode (otherwise the upgrade process can be very slow when using a wireless connection) and that it can ping the TC220 camera ip address. It is strongly suggested to upgrade the camera only when it is connected to the network in wired mode.
While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information in this document may be incorporated in future releases.
Need help?
Do you have a question about the TC220 and is the answer not in the manual?
Questions and answers