Avaya HC020 Camera Quick Setup Guide Package Content: Congratulations on purchasing your PTZ HC020 Camera for the Avaya Scopia ® • Avaya HC020 Camera XT Series. This brings a high quality 4K • 3m USB Cable sensor video source to your endpoint, •...
Page 2
Attach the USB connector to the USB upper socket at the rear of the XT Series endpoint (XT4300, XT5000 or XT7100). Step 3 If using HC020 as first camera, you should enable it as Default Camera in: Configure > Advanced > I/O connections > Cameras > General > Default Camera: USB - Please remove the SMALL plastic lens cover before using the camera - The video signal is captured from the USB port of the XT unit.