Tin Lizzie 18 (Ribbon Cable) Drill Templates
Remember the Index Sensor drill point is only
necessary if there is no suitable factory drilled hole.
Index Sensor
Drill Bit Size: #29 (.136")
Tap: #8-32
Drill Bit Size: #29 (.136")
Drill Bit Size: #29 (.136")
Index Sensor
Drill Bit Size: #29 (.136")
Tap: #8-32
Drill Bit Size: #29 (.136")
Drill Bit Size: #29 (.136")
Rear Power Supply
Rear Power Supply
Drill Template
Drill Template
Drill Bit Size: #29 (.136")
Drill Bit Size: #29 (.136")
Place this edge at the base of the neck
Drill Bit Size: #29 (.136")
Drill Bit Size: #29 (.136")
Rear Display Drill
Place this edge at the base of the neck
Template
Fold line
Drill Bit Size: #29 (.136")
Tap: #8-32
Base of the machine
Page 45