Scanning Receivable Stations; Storing Stations; Storing Stations Manually; Storing Stations Automatically - Bosch SLDA Operating Instructions Manual

100 | en
Note:
By long-tapping B or
adjust the frequency continuously.
After you release the button, the radio
tunes to the next station automatically.
5.6.3 Scanning receivable stations
f Tap G.
The receivable stations are played one after
another for around 10 seconds each.
To continue listening to the station that is cur-
rently being scanned,
f tap G again.
5.7 Storing stations
5.7.1 Storing stations manually
f First select the desired memory bank, if
necessary, and tune to the desired station.
f Long-tap one of the memory preset buttons
F.
The currently tuned station is then stored to the
memory preset button.
5.7.2 Storing stations automatically
f Select the autostore memory bank FM-AST or
AM-AST.
f Tap G.
The six stations offering the strongest reception
in the current waveband are stored automati-
cally. The stations are sorted according to their
reception strength; the station with the strong-
est reception is stored on memory preset 1.
Afterwards, the station stored on memory pre-
C you set 1 will be played.
5.8 Listening to a stored station
f First select the desired memory bank, if
necessary.
f Short-tap one of the memory preset buttons
F.
The stored station is played.
5.9 Radio-text display – on/off
Note:
If the stations in your reception area do
not support RDS, you will not be able
to use this function.
f Call up the tuner display.
f Tap 6.
f Tap Show radio text.
Displaying of radio text is enabled when the
check mark is displayed in the checkbox.
f Tap 6 to close the options display.
FM/AM radio mode
5.10 Traffic announcement
Note:
If the stations in your reception area do
not support RDS, you will not be able
to use these functions.
5.10.1 Traffic announcement priority

– on/off

f In radio mode, tap 6.
f Tap Show traffic announcements.
Traffic announcement priority is enabled when
the check mark is displayed in the checkbox.
f Tap 6 to close the options display.
When traffic announcement priority is enabled,
the TA symbol is displayed in the Home menu
and in the tuner display or in the display for the
currently playing media.
The device will play a traffic announcement as
soon as it receives one. The received station is
shown in the display for the duration of the
announcement.