Loading Your Own Points Of Interest Onto The Device; Point Of Interest Warnings Displayed During The Journey - On/Off - Bosch SLDA Operating Instructions Manual

Navigation
that belong to the same category and use the
name of the category as the file name.
You may create up to four additional levels of
categories and subcategories if you create a
corresponding folder structure. The name of a
folder will be recognised as the name of the
corresponding category or subcategory.
Notes:
f The csv file or the top-level folder
that represents a top-level category
must be stored inside a folder
named "myPOIs". Place this folder
in the root directory of a USB stor-
age device.
f A csv file that contains POI warnings
must be stored inside the folder
"myPOIs" or any of its subfolders.
The name of this file must begin
with "myPOIWarnings_" and end
with ".csv" (for example: "myPOI-
Warnings_Curves.csv"). Otherwise
the POI warnings cannot be dis-
played.
7.12.2 Loading your own points of
interest onto the device
Note:
When you load a new file, any of your
own points of interest that are already
stored on the device will be deleted.
f Switch to navigation mode.
f Connect the USB storage device containing
the file to the device.
The device detects the file automatically.
f Tap Download to confirm that you want to
load the file.
The progress and completion of the loading
operation are indicated.
f Confirm by tapping .
7.12.3 Point of interest warnings
displayed during the journey
– on/off
When the displaying of point of interest warn-
ings is enabled, the system displays a warning
when you approach a point of interest warning's
location.
Safety notice
The point of interest warnings stored
on the device may be incomplete or
outdated.
Therefore, please always ensure you
observe the actual road conditions and
the traffic regulations that are in force.
f In navigation mode, tap 6.
f Tap My POIs.
f Tap POI warning.
en | 119