Asus PE100A User Manual page 51

Initiating Fastboot mode:
1. Connect the USB Type-C® cable to the USB Type-C® ports on your
PE100A and host computer.
2. Power on your PE100A, you should automatically be booted into
Fastboot mode.
NOTE:
• Please note that you will only be booted into Fastboot mode when
booting up PE100A for the first time.
• Please refer to the readme file in the unzipped image folder for
details on other items such as re-flash or recovery.
Executing the flash script:
1. Download the OS image from the PE100A website, then unzip the
image file.
2. Run the flash script or command file to start the flash process. The flash
process should take a few minutes. Once the flash is completed, your
PE100A will reboot and you should be booted to the terminal prompt.
NOTE: Please refer to the readme file in the unzipped image folder for
troubleshooting steps.
PE100A 51