Caller Id Commands - Viking Components 56K User Manual

VIKING COMPONENTS 56K EXTERNAL MODEM USER'S GUIDE
MNP 10 Commands (Continued)
Command Function
@M0 Select initial transmit level of -26 dBm.
@M1 Select initial transmit level of -30 dBm.
@M2 Select initial transmit level of -10 dBm.
@M3 - @M10 Select initial transmit level of -10 dBm.
@M11 Select initial transmit level of -11 dBm.
@M12 Select initial transmit level of -12 dBm.
@M30 Select initial transmit level of -30 dBm.
:E0 Disable the compromise equalizer.
:E1 Enable the compromise equalizer.
W-Class Commands
Command Function
*B Display list of permanently blacklisted numbers.
*D Display list of delayed numbers.
*NCn Change country to one of eight NVRAM.

Caller ID Commands

Command Function
#CID=0 Disable Caller ID.
#CID=1 Enable Caller ID with formatted presentation.
#CID=2 Enable Caller ID with unformatted presentation.
35
Chapter 6