Using Data & Fax Communication Software; Changing The Modem Initialization String - Viking Components 56K User Manual

VIKING COMPONENTS 56K EXTERNAL MODEM USER'S GUIDE
Using Data and Fax Communication Software
Usually, most communication software installation programs will automatically
detect your Viking fax/modem and preform the appropriate configurations. In
some cases, you may find it necessary to configure the software so it can send the
appropriate commands to the fax/modem.
Although most applications have many different modems already programmed
into the software application, sometimes you may not be able to find the exact
match for your modem. For the best compatibility, select a Hayes Compatible
modem from the list of modems. If this is unavailable, change the modem initial-
ization string. To change the string, please see the section below.

Changing the modem Initialization String

If you can not find a matching modem listed, you can modify the modem initial-
ization string. Please refer to the data and communication software "User's Guide"
for details on making this change. The best initialization string to use is:
AT&F&C1&D2
21
Chapter 3