Really Right Stuff LCF-10P Manual

205 Higuera St, San Luis Obispo, CA 93401 USA
P.O. Box 6531, Los Osos, CA 93412 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStuff.com
LCF-10P FOR AF-S NIKKOR
70-200mm f/2.8G ED VR-I/II
SpecificationS:
We i g h t . . . . . . . . . . . . . . . . . . . . . . . . . 0 . 3 5 o u n c e s ( 10 g )
Material.................6061-T6 anodized aluminum
Dimensions.............1.0" x 1.275" / 26mm x 32mm
Height of Mounting Plate section....0.145" / 3.68mm
Total Height.............................0.300" / 7.62m
Comes with four flat head M2-0.4 x 8 and two flat head
M2-0.4 x 6 and black oxide steel screws, one 0.05" hex key.
top view
®
Replaces thin aluminum
plate mount on the lens
collar. This is where the
removable lens collar
foot slides onto the
collar. LCF-10P is 2½
times thicker than original
Nikon plate mount.
Maintenance
General care
Prevent grit from fouling the surface of the LCF-10P .
Periodically use included hex key to check security
of mounting screws. Seat hex key firmly and use
care to prevent stripping hex socket head.
cleaning
Wipe LCF-10P clean with a dry cloth to remove any
contamination prior to installing lens collar foot.
Guarantee
all really riGht Stuff brand productS
are Guaranteed to the oriGinal
purchaSer to be free of defectS in
MaterialS or workManShip for five
(5) yearS froM the date of purchaSe.
productS will be repaired or replaced
at our option.
® , ™, © 2011 Really Right Stuff, LLC.
All rights reserved.