Cycle Data - Viking Dishwasher Use & Care Manual

CHANGING A PROGRAM AFTER THE UNIT HAS STARTED
The dishwasher is programmed to stop operating if the door is opened during a cycle. If you want to change a
program or option after starting the machine, open the door slightly to let the spray arms stop rotating and avoid
getting sprayed with water. Press and hold START for three seconds to cancel the current selection then press the
touchpad(s) for your desired selection. Press START again and close the door. The drain pump will run to remove any
dirty water from the dishwasher before starting the newly selected cycle. Check to make sure there is still detergent in
the detergent dispenser.
WHEN THE WASH IS FINISHED:
The indicator lights will come on for the last wash program and options that you used. (NOTE: The unit will not retain
the Rinse/Hold or Quick program.)
CYCL]E]DATA
DFUD042 AND DFUD142
DESCRIPTION
Pots/Pans
Heavy
Normal
Light/China
Quick
Rinse/Hold
WATER TEMR
140°F or 170°F
(60°C or 75°C)
130°F or 160°F
(SS°C or
70°C)
130°F or 140°F
(SS°C or 60°C)
105°F or 120°F
(40°C or S0°C)
85°F or 120°F
(30°C) or S0°C)
PRE-WASH
2
2
1
MAIN WASH
1
1
1
1
1
RINSE
3
2
2
2
2
1
DESCRIPTION
Pots/Pans
Heavy
Normal
Light/China
Quick
Rinse/Hold
Total Wash Time - Minutes
EXTRA DRY OPTION
yes
yes
yes
yes
yes
yes
Total Water Gal (L)
4.5
4.5
3.4
2.4
2.1
0.8
Input Water
60°F (15°C)
A B
230 240
210 220
110 120
110 115
25
4
Input Water
120°F (49°C)
A B
190 195
175 185
85 95
85 90
15
4
A. Using the lower water temperature setting.
B. Using the higher water temperature setting.
NOTE: Includes time for dry
Express option available for Pots/Pans, Heavy, Normal, and Light/China cycles on DFUD142 model
only.
Reduces washing time and lowers temperature (not available on Quick wash or Rinse/Hold)
10