Advertisement
Commissioning information
How to link Mimic LED 'Shapes' to system events
Each used LED shape must be linked with a system event, such as:
¨
Device fire
¨
Device fault
¨
Channel fire
¨
Channel fault
¨
Zone fire
¨
Zone fault
¨
Card fire
¨
Card fault or
¨
Supervisory Command Build.
Below is a typical example that shows how a shape can be linked to a zone:
Drag and drop an LED 'Shape' onto the
a system event in the system tree. This
example shows
Shape 5
onto
Zone 5,
so the two are linked.
For full information on configuration see the instructions supplied with the Mimic Configuration tool.
Test
Test the Custom panel and ensure it gives the correct indication for the configured Vigilon System event.
Gent by Honeywell reserves the right to revise this publication from time to time and make changes to the content hereof without
obligation to notify any person of such revisions of changes.
by Honeywell
2
The LED Shape
Zone 5 - Fire
being dropped
So when
to
Note also the
IDC Connector
Hamilton Industrial Park, Waterside Road, Leicester LE5 1TN, UK
Telephone +44 (0) 116 246 2000
5 P16_26_8
.
Zone 5
has a fire event then the LED connected
Connection Converter
terminals
Connection Converter
P16
on the
4188-951_issue 2_01/12_Part 2_Mimic LED driver
Mimic LED Driver Card
here is linked to
26
and
8
will be lit (On).
is associated with
Mimic LED Driver Card.
Website: www.gent.co.uk
Fax (UK): +44 (0)116 246 2300
Advertisement
