Table of Contents
Advertisement
PW-6000 Installation
System Configuration via Web Interface
3. For the Alternate Host Port, make the following selections:
4. Click OK.
4.6 Device Information
Click the Device Info link on the navigation bar to display the read-only Access Control Device
Hardware Information screen:
Figure 11: PW-6000 Web Server Device HW Info Screen
22
www.honeywell.com
a. Connection Type. If you choose to configure an alternate host port, and if you have
selected Serial-RS232 for the primary host port, select IP Server from the drop-down
list for the alternate host port.
b. Data Security. Select one of the following values from the drop-down list: None,
Password/no AES, Password/AES.
c. Select a Baud Rate from the drop-down list.
d. Select a Flow Control from the drop-down list.
Get other manuals https://www.bkmanuals.com
Advertisement
Table of Contents
