Flame Does Not Stay On - Electrolux ICON E24WC160ES Technical & Service Manual

Troubleshooting

Flame Does Not Stay On

1. Is the control knob obstructed by the control panel?
If so lengthen the axis by inserting a washer into the
control knob. (See Figure 5-16)
2. Check thermocouple connections. (See Figure 5-17)
3. Check thermocouple and replace if necessary.
4. Does the pressure regulator function properly? (Over
or under pressure listed on the data plate)
(See Figure 5-18 & 5-19)
5. Is the pressure regulator correct for the unit? (See
data plate on unit)
6. Replace the complete gas control valve.
(See Figure 5-20)
7. For appliances with a gas thermostat, check the
function of the thermostat. Position 1 (Min.) Position
7 (Max.).
Figure 5-20.
5-6
Figure 5-16.
Figure 5-17.
Figure 5-18.
Figure 5-19.