Electrical Information - Electrolux ICON E24WC160ES Technical & Service Manual

Electrical Information

YOU MUST FOLLOW THESE GUIDELINES TO
ENSURE THAT THE WINE CELLAR SAFETY
MECHANISMS ARE OPERATING CORRECTLY.
• The wine cellar operates on a single phase
alternating current (AC). Please check that the
voltage shown on the serial plate corresponds to your
power supply. All wine cellars require a connection
to an electrical power source. Improper hook-up can
result in a safety hazard and potential damage to the
product or contents!
Proper installation, in accordance with the
manufacturer´s specifications and all local codes, is
the sole responsibility of the consumer. The
manufacturer is not responsible for any installation
expenses or damages incurred due to improper
installation. If you are insure of your ability to safely
connect electric power to the unit, consult a licensed
and insured professional to perform all electrical
work.
• If the power cord is damaged, it should be replaced
by the manufacturer, service technician, or a
qualified person.
• Never unplug the wine cellar by pulling on the power
cord. Always grip the plug firmly and pull straight out
from the receptacle to prevent
damaging the power cord.
• To avoid electrical shock, unplug the wine cellar
before cleaning and before replacing a light bulb or
LED light.
To turn off power to your wine cellar, unplug the
power cord from the wall outlet.
• Performance may be affected if the voltage varies
by 10% or more. Operating the wine cellar with
insufficient power can damage the compressor.
Such damage is not covered under your warranty.
• Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the wine cellar from
being turned off accidentally.
Installation Information
THE WINE CELLAR MUST BE GROUNDED.
ELECTRICAL LEADS MUST BE ROUTED AND
SECURED SO THAT THEY CANNOT COME INTO
CONTACT WITH HOT OR SHARP PARTS OF THE
WINE CELLAR.
2-3