Installation Information
Installation Of Guides And Shelf
Supports
Install guides for the sliding shelves by placing the rear
hook of the guide in front of the desired hole in the rear
row ( Arrow 1 Figure 2-8 ). Push in the direction of the
arrow, then do the same with the front hook.
(Arrow 2 Figure 2-8)
Figure 2-8.
To install the shelf support for the storage shelf, place the
support hooks in the holes at desired level, press in as
arrow 1 indicates and push down as arrow 2 indicates
(See Figure 2-9).
1
Figure 2-9.
The reinforcement bar is a shelf support and must
not be removed for safety reasons.
Reinforcement
Bar
Figure 2-10.
1
2
2
2-4