Table of Contents
Advertisement
Assembly Instructions
Step 7: Attach Desk & Supports to Desk Base
A. Remove the two M8x15L Screws and Washers (19) from the ends of the
Left and Right Desk Attachment Frames (9)(10).
B.
Position the Desktop over the Desk Base Frame(8) and slide the Left and
Right Desktop Attachment Frames(9)(10) into the Desk Base Frame.
C. Slide the frames all the way down and tighten the two M8 x 15 screws with
Washers(19), one on each side. Fully tighten all hardware.
D. Fully Tighten the the four M8x15L Screws and Washers(18) to fully secure
the Desktop to the Attachment Frames (9)(10) from Step 6C.
NOTE:
Recommend
using 2
people to
turn over
Desktop
Assembly
and to slide
Frames into
the Desk Base
Frame
M8 x 15L Bolt
(x2)
PRE-INSTALLED
18
9
8
5mm Allen
Wrench w/
Phillips
19
10
Advertisement
Table of Contents
