Advertisement
Step 8. Seal Battery Box Entry Plate to Battery Box
Tip the battery box assembly vertically with Biomark battery label faced away from you and
inspect the proper alignment of the entry plate with the battery pack flange.
ADVISORY: Ensure all wires clear entry plate, sealing gasket, and battery box flange. Failure
to prevent pinching of internal wiring may result in severed electrical connection or improper
seal of battery pack.
1
3
Install sealing bolts into each of the four corners of the entry plate, lining up each location to
achieve proper gasket alignment. Each sealing bolt should be fixed with a ¼" flat washer.
Continue installation of remaining hardware
QUICK START GUIDE
SUBMERSIBLE BATTERY INSTALLATION
2
4
7
Advertisement
