Cisco cBR Series Manual page 7

Maintaining the power system

Hide thumbs Also See for cBR Series:

•

Remove the Power

Modules.

• If you are replacing the entire power system,

• Be aware of the weight and size of the equipment. Handle it with care.

Required Tools and Equipment

• ESD-preventive wrist strap

• T10 Torx screwdriver

• Antistatic bag

Procedure

Step 1

Loosen and remove the four #6-32 Torx-head screws on the mounting flanges of the FPEM using a T10 Torx screwdriver.

Figure 5: Removing the FPEM from the Chassis

Step 2

Slide the FPEM out of the chassis using the handles on either side applying even pressure to both handles.

Step 3

Place the removed FPEM in an antistatic bag.

remove the Power Cassette

Module.

Table of Contents