V-TAC 80133970 Installation Instruction page 3

Instructions FOR USE
Charging the speaker
1. The speaker has a built-in rechargeable ba�ery. When the ba�ery is running flat the, speaker will
turn OFF automa�cally. Please recharge the ba�ery.
2. It takes 4 - 5 hours to fully charge the speaker. Once the speaker is fully charged, LED Light
would turn OFF.
3. It is recommended to fully charge the speaker before its first use. Turning ON/OFF the Speaker -
before Turning the speaker ON, please ensure that it is fully charged.
4. Press and hold the ON/OFF bu�on to for 2-3 seconds to turn on/off the unit.
Wireless Connec�on
▪ Press and hold the ON/OFF bu�on for 2-3 seconds to turn the unit ON. You would hear an
indica�on tone, indica�ng that you are now in Bluetooth Pairing Mode.
▪ Ac�vate the Bluetooth func�on on your source device (Mobile Phone or Tablet). Please refer to
manufacturer's instruc�ons for instruc�ons on enabling Bluetooth on your device.
▪ Search for available Bluetooth devices and you would find "V-TAC" – Pair it with this device.
▪ If required, enter the password "0000" to pair with the device.
▪ Once paired successfully, you will hear another indica�on tone.
▪ You can now stream wireless music on your speaker through your device.
STREAM MUSIC-USB Or Micro SD(TF) Card
▪ Turn ON the speaker.
▪ Insert the USB Flash Drive or Micro SD (TF) Card preloaded with songs, into the USB or Micro SD
(TF) Card Slot of the speaker respec�vely. Speaker would automa�cally start playing songs from
the USB Flash Drive or Micro SD (TF) Card.
Note: USB Flash Drive or Micro SD (TF) Card is not included.
▪ To Skip Track Forward – Short press the Skip Forward bu�on.
▪ To Skip Track Backwards – Short press the Skip Backward bu�on.
▪ To Pause the Track – Short press the Play/Pause bu�on.
▪ To Play the Track – Short press the Play/Pause bu�on.
▪ Long press Volume Increase bu�on to increase the volume or Volume Decrease bu�on to
decrease the volume.