V-TAC VT-7562 Installation Instruction

TECHNICAL DATA
MODEL
WATTS
LUMENS
BEAM ANGLE
UNIT COLOR
CABLE LENGTH
INPUT VOLTAGE
ADAPTER OUTPUT
[NOT INCLUDED]
MATERIAL
DIMENSION
BATTERY CAPACITY
CHARGING TIME
WORKING TIME
TOCUH DIMMING LEVEL
INTRODUCTION
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installation and keep this manual handy for future refer-
ence. If you have any another query, please contact our dealer or local vendor from whom you
have purchased the product. They are trained and ready to serve you at the best. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the
product. This product is warranted for manufacturing defects only.
WARNING!
1. Please make sure to turn off the power before
starting the installation
2. The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole
luminaire shall be replaced.
This marking indicates that this
product should not be disposed
of with other household wastes.
INSTALLATION INSTRUCTION
TABLE LAMP
VT-7562
2W
200LM
180°
WHITE / BLACK
1 METER
DC:5V, 2A
DC:5V, 1A~2A
ALUMINIUM
Ø108x325mm
4400mAH
6-8 Hours
8-10 Hours
10~100%
WEEE Number: 80133970
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
Caution, risk of electric shock.
2
*
WARRANTY
IP54
RATING