Table of Contents
Advertisement
Surface-mounted
Installation notes –
surface-mounted
Sealing between the SmartLine
Element and the worktop
The SmartLine element and worktop
may be damaged if the element
needs to be removed after it has
been sealed with a sealant.
Do not use any sealant between the
SmartLine element and the worktop.
The seal under the edge of the top
part of the appliance provides a
sufficient seal for the worktop.
Tiled worktop
Grout lines and the hatched area
underneath the SmartLine element
frame must be smooth and even. If they
are not, the SmartLine element will not
sit flush with the worktop and the
sealing strip underneath the top part of
the appliance will not provide a good
seal between the appliance and the
worktop.
Sealing strip
Dismantling the SmartLine element
for service purposes may damage
the sealing strip underneath the edge
of the SmartLine element.
Always replace the sealing strip
before reinstalling the SmartLine
element.
Installation
41
Advertisement
Table of Contents
