Table of Contents
Advertisement
Burner
Do not clean any parts of the burners
in a dishwasher.
The surface of the burner cap will
become duller with time. This is
completely normal and does not
indicate material deterioration.
The burner should be dismantled and
then cleaned by hand using a
solution of warm water and a little
washing-up liquid applied with a soft
sponge.
Clean any soiling from the flame
openings.
Danger of explosion.
Blocked flame openings can cause a
dangerous build-up of gas in the
base of the hob which could ignite
and cause an explosion. This can
lead to damage to the appliance and
injury.
Ensure the flame openings are kept
clean at all times.
Parts of the burner that cannot be
removed should be wiped clean with
a damp cloth only.
The ignitor and thermocouple should
be very carefully wiped clean using a
well wrung-out cloth.
The ignitor must not get wet,
otherwise it will not spark.
Finally dry everything thoroughly with
a clean cloth. Make sure that the
flame openings are completely dry.
Cleaning and care
Place the burner head onto the
burner base so that the
thermocouple and the ignition
electrode extend through their
respective holes in the burner head.
The burner head must click into place
correctly.
Place the burner cap flat over the
burner head . When correctly
positioned, the burner cap will not
slide about.
Ensure that all parts of the burner are
reassembled in the correct order.
31
Advertisement
Table of Contents
