Cleaning The Appliance And The Brushhead - Philips SC5370 User Manual

12
English
4 Place the brush head on your right cheek.
5 Press the on/off button once to switch on the appliance. The
appliance starts to operate at intensity setting 1. If you want to use
intensity setting 2, press the on/off button twice. Press three times
to switch off the appliance or wait until it switches off
automatically (Fig. 7).
6 Gently move the brush head across your skin from the nose
towards the ear (Fig. 8). Do not push the brush head too hard onto
the skin to make sure the treatment remains comfortable.
7 After 20 seconds, the appliance pauses briefly to let you know that
you have to move the appliance to the left cheek (Fig. 9).
8 After 20 seconds, the appliance pauses briefly to let you know that
you have to move the appliance to the forehead. Gently move the
brush head from left to right (Fig. 10).
Note: We advise you to not overdo the cleansing and to not
cleanse any zone longer than 20 seconds.
9 After the treatment, rinse and dry your face.Your face is now ready
for the next step of your daily skincare routine.
10 Clean the brush head with water and mild soap.
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the appliance.

Cleaning the appliance and the brushhead

Make sure the appliance is switched off before you start cleaning it.
Rinse the appliance and the brush head thoroughly with water and
mild soap after each use, to ensure optimum performance.
1 Rinse the appliance and the brush head under the tap with warm
water and mild soap (Fig. 11) (max. 40ºC / 104ºF).
2 Remove the brush head from the appliance (Fig. 12).
3 Clean the back of the brush head and the connection pin of the
appliance under the tap at least once a week (Fig. 13).
4 Dry the brush head and the appliance with a towel.