Basic Operation; Web Interface - Dataprobe iBootBar Installation And Operations

iBootBar Page 10

Basic Operation

Web Interface

The iBootBar web interface provides the easiest means of operating the outlets and monitoring the current status of the
units. One or more outlets can be simultaneously controlled with simple mouse clicks. The interface is divided into three
sections Header, Control, and Status
Header The Header identifies the iBootBar currently being addressed. It displays the Device Name assigned to it in setup.
Two buttons on the Header allow control of the iBootBar either by individual outlets, or by user assigned groups.
Status The Status panel displays the current state of each outlet, and provides a checkbox for each outlet to allow for
selection for the next outlet change activity. The bottom of the Status panel shows the current draw of the A/C inputs. In
iBootBars with dual inputs, the current draw will be displayed separately for outlets 1 – 4 (Main A) and 5-8 (Main B). If
AutoPing is being used, the current status of AutoPing is displayed. Click on the AutoPing status message for more
details.
ibootbar_v1.2x