Download The App - QUAD Vena II Play User Manual

Wireless streaming integrated amplifier
Table of Contents

Advertisement

DOWNLOAD THE APP

The DTS Play-Fi APP can be downloaded from the Google Play Store, Amazon APP Market or Apple App Store. For Windows PC
you can download the Play-Fi Windows APP from the official website: https://play-fi.com
Network Settings
Wired network setting
Connect the Ethernet Port to the LAN port of a wireless router using a suitable cable. After switching on the Vena II Play, the white
NET LED on the front panel and red Wi-Fi LED on the rear panel will flash during the initialize phase of Wi-Fi mode. the white NET
LED will slow-flash when the device goes into the wired network connection. If the connection is successful, the red Wi-Fi LED will
go off, but the white NET LED stays lit.
Wireless Network Setting
You can connect to a wireless network using one of two modes: WPS Mode or Standard Mode.
WPS Mode:
In order to make the Vena II Play enter WPS Mode, switch the unit on and press and hold the Wi-Fi SET-UP button on the rear
panel for 4 seconds. The Wi-Fi LED will double-flash and beep with a warning tone indicating that WPS Mode is active. Then briefly
press the WPS key on your wireless router and the unit should connect to your wireless network automatically. This connection
phase may take up to 60 seconds. If the connection fails, please try again. However, if the unit has failed to enter WPS Mode for
2 minutes, the unit will convert into Standard Mode.
Standard Mode:
After switching the Vena II Play on, press and hold the Wi-Fi SET-UP button on the rear panel for 8 seconds. For the first 4 seconds
the Wi-Fi LED will double-flash and beep with a warning tone - keep holding the button down and after 8 seconds the Wi-Fi LED
will flash quickly and also beep with a warning tone. The Standard connection mode is now active and the Wi-Fi hotspot will be
found after 20 seconds. Then the Wi-Fi LED will flash-breathe with a slow fluctuation between off and on (reflected by the white
LED on the front panel). You can now use your Android or IOS device to enter the Wi-Fi password using the Play-Fi APP as follows
(see next page):
15

Advertisement

Table of Contents
loading

Table of Contents