QUAD Vena II Play User Manual page 7

NET Button
Activates DTS Play-Fi mode for wireless audio streaming and APP control.
Volume Knob
You can rotate the volume knob clockwise to increase the volume, rotate it counter-clockwise to decrease the volume. Press it once
to mute the volume then press twice to un-mute the volume.
Volume Indicator
The volume level indicators have two states: brightly lit and off. To switch between the states, press and hold the volume knob for
4 seconds. In the 'off' state, the indicators will light for 5 seconds once the unit is activated, then go off. 'Off' is the default state.
Standby Button
Press the Standby button briefly to enter/exit the Standby mode.
Hold and press for 4 seconds to enter auto-standby set-up mode.（Please refer to page 12 to enable this function）
USB A Firmware Upgrading Port
This port must only be used to upgrade the internal firmware of Vena II Play. It cannot be used to connect a computer or USB disc
to play music.
Ethernet Port
QUAD Vena II supports wired connection to your network music source. Connect the Ethernet Port to the LAN Port of a wireless
router using a suitable cable. We recommend you use the wired network to play high resolution files without interruption or
instability.
Set-up Button
Use the setup button to help set up your WiFi connection. Press and hold it for 4 seconds to enter the WPS network set-up mode.
Press and hold for up to 8 seconds to enter the standard network set-up mode. Press the button again to cancel the WPS network
set-up mode.
7