QUAD Vena II Play User Manual page 12

Remote Headphone NET
Receiver Output Button
Standby Mode
Vena II Play will be in standby mode when powered on. The
Play out of standby.
You can activate the 'auto standby' function, as follows, by holding the
The Standby indicator flashes once: Auto-Standby Never. QUAD Vena II Play will not go into Standby mode even if there is no
signal input or operation.
The Standby indicator flashes twice: Auto-Standby 20 minutes. QUAD Vena II Play will automatically go into Standby mode if there
is no signal input or operation for 20 minutes.
The Standby indicator flashes thrice: Auto-Standby 1 hour. QUAD Vena II Play will automatically go into Standby mode if there is
no signal input or operation for 1 hour.
Protection Mode
Vena II Play is protected by a thermal switch which interrupts the AC Power supply if the amplifier is grossly overloaded for a period
of time. To restore operation, simply press the
short-circuited output etc, but not neccessarily against seriously inadequate ventilation.
Mute Mode
Users can press the remote handset button
playing music. When muted, the volume indicator on the front panel will flash.
Combination Keys Function
PHONO+NET: Restore Factory Defaults
Synchronously hold and press the buttons " NET and PHONO "for 8 seconds, the Standby LED will flash twice with a warning
tone. Then Vena II Play will automatically restore the factory defaults and restart.
PHONO+Volume: Power-on Volume Limit Set-up
To protect the speakers from being damaged by excessive volume, Vena II Play allows you to set up the volume limit value when
powered on.
Synchronously hold and press the buttons "PHONO and Volume" for 4 seconds, release them when the volume indicator flashes.
Now you can set up the Power-on volume limit value by rotating the volume knob, then press the knob once to confirm the set-up,
the indicator will be stably lit.
Input Selection
Indicators
BT USB OPT COAX
Button Button Button Button
button on the front panel. It is thus fully protected against gross overload,
or press the volume knob to bring Vena II Play in or out of Mute mode when
AUX1 AUX2 PHONO
Button Button Button
indicator on front panel is lit. Press
button down for 4 seconds.
12
Volume Level
Indicators
Volume Standby Standby
Knob Button Indicator
button to bring Vena II