QUAD Vena II Play User Manual page 13

You can set up any volume from Min. level to Max. level depending on your need. If Vena II Play was switched off with the volume
level above the set-up value, the set-up volume defaults to be played when the unit is next switched on. If Vena II Play was switched
off with the volume level below the set-up value, the volume will keep the same when the unit is next switched on.
Playing Music via Analog Inputs
Connect the analog signal of a source unit to Vena II Play's AUX1 or AUX2 input. Press AUX1 or AUX2 button on the front panel.
AUX1 or AUX2 indicator will be lit and music will start playing.
Playing Music via Digital Inputs
Connect coaxial SPDIF signal of source units to the digital in COAX jack on Vena II Play's panel. Press COAX button on the front
panel.
Connect optical (TOSLink) signal of source units to Vena II Play's OPT jack on Vena II Play's rear panel. Press OPT button on the
front panel.
Playing Music via USB input
Connect a Mac or PC via the B-type USB interface on Vena II Play's panel. Press USB button on the front panel. USB indicator will
be lit, and then click play on your music player software to play audio files stored on your computer.
Playing Music via Bluetooth
You can wirelessly connect Vena II Play to a music source via Bluetooth wireless technology. Volume up/down, standby and mute
in/out can be controlled from either your Bluetooth source or from Vena II Play. Other functions-play, pause, previous track, next
track, fast forward and reverse are all controlled from your Bluetooth source only.
Establishing a Bluetooth Connection
1. Place Vena II Play and a Bluetooth music source within a few meters of each other.
2. Power on Vena II Play and select Bluetooth as the source. The Bluetooth source indicator will flash when in pairing mode.
3. Activate the Bluetooth function on your music source.
4. Select "Quad Vena II Play" when Vena II Play is found to start the pairing process.
5. If prompted for a password, enter "0000".
To play music
Select Vena II Play as a music output device on your Bluetooth source to start playing music.
Dsiconnecting
To disconnect the Bluetooth music source either:
Move the Bluetooth source beyond the communication area
Turn off the connected device or turn off its Bluetooth function
Hold and press the BT button for 3 seconds to disconnect the BT compulsorily
Note:
If you have difficulty connecting Vena II Play to a Bluetooth device, please try selecting "Forget this Device" on your source unit
and then go through the connection procedure again.
Playing Music Via DTS Play-Fi
You can stream music from multiple sources via the DTS Play-Fi functionality of the Vena II Play. See the following pages for more
information about DTS Play-FI and the world of music sources which you can connect and enjoy via the Quad Vena II Play.
13